;===============================================================================
; ASPEED Graphcis UEFI Driver Release Notes
;===============================================================================
v.1.01.05: ycchen@052715
01.[Bug] [AST2500] Fixed 1680x1050 display abnormal issue on DELL 2410 monitor
02.[New] [AST2500] Support AST2500 VGA only mode(without BMC)
v.1.01.04: ycchen@041315
01.[Bug] [AST2500] Fixed Threshold Issue for reduced blank mode
02.[New] Support reducded blank mode for 1280x800, 1440x900, 1680x1050 and 1600x900
v.1.01.03: ycchen@040315
01.[New] [AST2500] Remove AST2500A0 VCLK Patch
02.[Bug] [DP501] Fixed cannot display issue with 2-lanes design
03.[Bug] [DP501] Fixed sw reset cause screen blank issue
04.[Bug] [ITE66121] Fixed screen blank issue sometimes
v.1.01.02: ycchen@031815
01.[Bug] Fixed Failed to Install Driver on Windows2012
v.1.01.01: ycchen@012815
01.[Bug] [DP501] Fixed ARM IRQ8 increase rapidly issue
v.1.01.00: ycchen@012215
01.[New] Support AST2500 and AST2400+ITE66121
02.[Bug] [DP501] Fixed Linux drm driver parsing error if the monitor has EDID extension block
03.[Bug] Remove wide screen mode if iKVM not support wide screen mode
------------------------------------------------------------------------------- 
v.1.00.10: ycchen@121914
01.[Bug] Fixed Failed to Load on Intel UEFI BIOS, ycchen@121914
v.1.00.09: ycchen@120414
v.1.00.08: ycchen@120314
01.[Bug] Fixed 1366x768 display abnormal on Windows 2012 Installation
v.1.00.07: ycchen@091214
01.[New] [AST2400] Enable PCI AER for Windows 2012 WHQL Certificaation
02.[Bug] Fixed "CR has Bad Signature" with newer AMI CSM Modules
03.[Bug] [ITE66121] Fixed Scratch Incorrect Settings
v.1.00.06: ycchen@080514
01[Bug] Fixed 1366x768 cannot display properly
v.1.00.05: ycchen@072314
01.[New] Support AST2400+ITE66121
02.[Bug] [DP501] Fixed Win2008R2 BSOD Issue
v.1.00.04: ycchen@071014
v.1.00.03: ycchen@063014
01.[Bug] [DP501] Fixed Install Win2008R2 may casuse Screen Blank
v.1.00.02: ycchen@061414
01.[Patch] [DP501] Patch Screen cannot resume properly if Screen off more than 10 min with AOC i2369 monitor
v.1.00.01: ycchen@060514
v.1.00.00: ycchen@052914
01.[New] Support Wide Screen Mode and Parsing for Prefer Mode Timing, ycchen@052914
---------------------------------------------------------------------------------
v.0.99.12: ycchen@051314
01.[Fixed] Fixed Screen No Display Issue if attached non-EDID monitor with v.0.99.11 GOP driver
v.0.99.11: ycchen@050814
01.[Fixed] Fixed Stressed Reboot cause No Display Issue with DP2VGA dongle(chipset:ST,fw:v.1.5) + KVM ATEN CS-1316
02.[Fixed] Fixed Monitor "Out of Screen" Issue if Install RHEL6.4 in UEFI Mode
v.0.99.10: ycchen@040714
01.[Bug] [DP501] Fixed No Display Issue if BMC reset
02.[Bug] [DP501] Fixed No Display Issue with DP2VGA dongle(chipset:ST,fw:v.1.5 and before) + KVM ATEN CS-1316
03.[Bug] [DP501] Fixed No Display Issue with DP2VGA dongle(chipset:ST,fw:v.1.5 and before) + ASUS VS228H
v.0.99.08: ycchen@021714
v.0.99.07: ycchen@012414
01.[Bug] [DP501] Fixed Screen Blank Sometimes and need to re-plug to resume
v.0.99.06: ycchen@010714
01.[Bug] [DP501] Fixed Screen Blank Sometimes even re-plug DP connector
v.0.99.05: ycchen@122613
01.[Bug] [DP501] Fixed Screen Blank Sometimes even re-plug DP connector
02.[New] [DP501] Modify for Lenovo Ramjet and Renegade SDV
v.0.99.04: ycchen@120613
01.[Bug] [DP501] Fixed EDID cannot be read properly when system reset
v.0.99.03: ycchen@112913
01.[Bug] [DP501] Fixed monitor noise when system reboot or shutdown
v.0.99.01: ycchen@112113
01.[Bug] [DP501] Fixed DP Monitor Compatible Issue
v.0.99.00: ycchen@111113
01.[New] [DP501] Direct Access EDID
------------------------------------------------------------------------------- 
v.0.98.04: ycchen@110113
01.[Bug] Fixed AST2400 + DP501 cannot display issue
v.0.98.01: ycchen@100813
01.[New] Support AST2400 + DP501
02.[Bug] Fixed Driver Version not show correctly issue
03.[Bug] Fixed Win2008 Installation Screen Abnormal with UEFI + Legacy option ROM
04.[New] use MMIO instead
------------------------------------------------------------------------------- 
v.0.97.06: ycchen@032013
01.[New] Support AST2300/2400 + DVO, AST2300 + ITE66121
02.[Bug] Modify for Read EDID un-stable issue
v.0.97.05: ycchen@121812
01.Remove Wide Screen Support
v.0.97.04: ycchen@112912
01.[AST2300/2400] [Bug] Modify for DRAM Settings by H/W Request
02.[New] Support Wide Screen Modes
03.[Bug] [AST1100/2050/2100/2150/2200] Fixed Display Abnormal Issue in VGA only mode
04.[New] [AST2300] Disable ASPM in GOP driver
05.[New] [AST2300/2400] Support AST2300/2400 + ITE66121
-------------------------------------------------------------------------------
v.0.96.00: ycchen@081412
01.[Bug] Fixed failed to install Win8
02.[New] [AST24000] Support AST2400
03.[New] [AST2300/2400] Modify DRAM Setting for H/W Request (2012_5_9)
04.[New] [AST2300/2400] Set VGA as DAC output
v.0.93.08: ycchen@053111
01.[New] [AST2300] Modify MCLK to 396MHz by H/W request
v.0.93.07: ycchen@050911
01.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor
v.0.93.04: ycchen@030411
01.[New] [AST2300] Modify for DDR3 2Gb Support
02.[New] [AST2300] Slow Down CPU/AHB clock in VGA only mode
v.0.93.03: ycchen@021511
01.[New] [AST2300] Modify AST2300 DRAM Timing by H/W Request (020811)
02.[New] [AST2100/2150] Enable AST2100/2150 DRAM Calibration by H/W Request (021411)
v.0.93.02: ycchen@122410
01.First Release
