Fresco Logic FL6000 USB 3.0 F-One Controller Drivers 1.3.36231.1
Driver package for Windows 10, 32-bit & 64-bit. Released Jun 8, 2020.
- Manufacturer
- Fresco Logic
- Version
- 1.3.36231.1
- Release date
- Jun 8, 2020
- Windows
- Windows 10
- Architecture
- 32-bit & 64-bit
- Size
- 9.8 MB
- Hardware IDs
- 8 supported (see list)
- Category
- USB › Fresco Logic
Download
FrescoLogic-USB_1.3.36231.1.zip
How to install
- Check that this is the right driver. Open Device Manager (right-click the Start button), right-click your device, choose Properties and look at "Hardware Ids" on the Details tab. The value should match one of the supported IDs below (more about hardware IDs).
- Extract it to a folder. If the folder contains
setup.exeorinstall.exe, run it as administrator. - If there is no installer, right-click the device in Device Manager, choose Update driver, then "Browse my computer for drivers", select the extracted folder (leave "Include subfolders" ticked) and click Next.
- Restart the computer and check that the device no longer shows a yellow warning sign in Device Manager.
Windows 11 is not listed by the manufacturer, but drivers made for 64-bit Windows 10 usually work on Windows 11 as well.
Supported hardware IDs
This driver package declares support for 8 device IDs. Open an ID to see every driver available for that device.
| Hardware ID | Device |
|---|---|
| USB\VID_1D5C&PID_6000&REV_0100 | Fresco Logic F-One Controller (FL6000) |
| USB\VID_1D5C&PID_6000&REV_0101 | Fresco Logic F-One Controller (FL6000) |
| USB\VID_1D5C&PID_6000 | Fresco Logic F-One Controller (FL6000) |
| FONE\ROOT_HUB&REV_0100 | |
| FONE\ROOT_HUB&REV_0101 | |
| FONE\ROOT_HUB | |
| FONE\USB2HUB&REV_0100 | |
| FONE\USB2HUB |
Other drivers for this hardware
| Driver | Version | Date | Windows |
|---|---|---|---|
| Fresco Logic FL6000 USB 3.0 F-One Controller Driver | 1.3.37177.1 | May 4, 2022 | Windows 10, 11 |
| Fresco Logic FL6000 USB 3.0 F-One Controller Drivers | 1.3.36587.1 | May 31, 2021 | Windows 10 |