JMicron JMB36X Controller 1.17.65.11
Driver for Windows XP–10, 32-bit & 64-bit. Released Jul 24, 2013.
- Manufacturer
- JMicron
- Version
- 1.17.65.11
- Release date
- Jul 24, 2013
- Windows
- Windows XPWindows VistaWindows 7Windows 8Windows 8.1Windows 10
- Architecture
- 32-bit & 64-bit
- Size
- 69 KB
- Hardware IDs
- 1 supported (see list)
- Category
- SATA / RAID › JMicron
Download
JMicron_JMB36X_Controller.zip
How to install
- Check that this is the right driver. Open Device Manager (right-click the Start button), right-click your device, choose Properties and look at "Hardware Ids" on the Details tab. The value should match one of the supported IDs below (more about hardware IDs).
- Extract it to a folder. If the folder contains
setup.exeorinstall.exe, run it as administrator. - If there is no installer, right-click the device in Device Manager, choose Update driver, then "Browse my computer for drivers", select the extracted folder (leave "Include subfolders" ticked) and click Next.
- Restart the computer and check that the device no longer shows a yellow warning sign in Device Manager.
Windows 11 is not listed by the manufacturer, but drivers made for 64-bit Windows 10 usually work on Windows 11 as well.
Supported hardware IDs
This driver package declares support for 1 device ID. Open an ID to see every driver available for that device.
| Hardware ID | Device |
|---|---|
| PCI\VEN_197B&DEV_2360 | JMicron Technology Corp. JMB360 AHCI Controller |
Other drivers for this hardware
| Driver | Version | Date | Windows |
|---|---|---|---|
| JMicron SATA RAID Drivers | 1.17.65.11 | Sep 17, 2012 | Windows XP–8 |